Polaris 9550 Sport
4WD Robotic Cleaner with 7 Day Program and Remote
SKU #F9550
The Top-of-the-line 4WD robotic pool cleaner featuring Easy Lift System, motion-sensing handheld remote, dirty canister indicator, and Vortex Vacuum technology for best-in-class cleaning performance.
The 9550 Sport 4WD provides best-in-class cleaning performance and features. The absolute top-of-the-line 9550 Sport tackles any pool terrain, climbs steps and walls, and scrubs tile line with a solid-blade scrubbing brush. One of the distinct advantages of 9550 Sport is the smart 7-day programmable timer, with fully customizable cleaning cycles that allows pool owners to set it and forget it. With just a simple setting, you can clean the pool as frequently as you like and enjoy a pleasant, healthy pool all the time. In addition, the new and intuitive motion sensing remote puts the cleaning control in the palm of your hand. Just point and direct the 9550 Sport to any desired location in the pool and you will never miss a spot. It is also the only model in the family that features a dirty canister indicator.
The 9550 Sport cleans pools up to 60' in length. It includes a new premium, compact transport caddy that can be assembled in just minutes without using any tools. Model is backed by a 2 year limited warranty.
Polaris 9550 Sport Features
Motion-Sensing Remote
Easy Lift System
Dirty Canister Indicator
Vortex Vacuum Technology
Easy Clean Filter Canister
7-Day Programmable Timer
ActivMotion Sensor®
4-Wheel Drive Technology
Waterline Only Cleaning Cycle
Polaris 9550 Sport Specifications
Polaris 9550 Sport User Guides
Polaris 9550 Sport Frequently asked questions
- Leaf Canister (R0535900) with coarse mesh, or
- Ultra Fine Sand/Silt Canister (R0535800) with very fine mesh.
- Check the canister again to make sure that the mesh screen is not clogged by fine debris. Spray the canister with water if necessary.
- Check the flow outlet screen and remove any debris that may block flow. If the problem persists, contact our Technical Support team at 800-822-7933.
- The filter canister is full or dirty. Clean the filter canister, see "Cleaning the Filter Canister" in manual.
- Sides of pool are slippery or slimy. Although the water seems clear, microscopic algae, invisible to the human eye, are present in the pool. As a result the pool sides become slippery and prevent the cleaner from climbing. Check tires for wear and replace as necessary. Do a shock chlorination treatment and slightly reduce the pH. DO NOT leave the cleaner in the pool during this treatment.
- There is air in the appliance casing. Submerge the cleaner following the procedure in "Submerging the Cleaner" in the manual.
- The filter canister is full or dirty. Clean the filter canister, see "Cleaning the Filter Canister" in manual.
- The brushes have become smooth or the "wear" indicator shows. Replace the brushes following the procedure in "Replacing the Brushes" in the manual.
- Filter canister is full or dirty. Clean the filter canister following the procedure in "Cleaning the Filter Canister" in the manual.
- Make sure the floating cable is spread out over the pool. Ensure the cable is not too tightly wrapped or coiled when storing. If the problem persists, lay the cable straight in the sun to relax it and remove kinks.
- The dirty filter canister lights up when the canister is full or partially clogged. Turn off the cleaner, empty debris, and spray canister to clear fine debris from canister.
- The control unit will reset itself when the dirty canister is replaced with a clean one. Press start/stop button to make sure that the indicator light is off.
- Unplug floating cable from the control unit and reconnect.
- Remove cleaner from the pool and re-submerge, see "Submerging the Cleaner" in the manual.
- Propellor or wheels may be jammed and not turning correctly. Contact Polaris Technical Support at (USA) 1-800-822-7933.
- The outlet, the control unit is connected to, is not supplying electrical power. Check that the outlet to which the control unit is connected is receiving electricity.
- Check that you have started one (1) of the two (2) programs and check that the indicator for the selected program is lit. If the indicator light is not lit, turn the wheels then disconnect the control unit and wait at least 20 seconds before reconnecting. If the problem persists, contact Polaris Technical Support at (USA) 1-800-822-7933.
Polaris 9550 Sport Related Products
Polaris 9650iQ Sport
The 9650iQ Sport is a 4WD robotic cleaner that provides premium cleaning performance with the convenience of iAquaLink®
Control.
Polaris 9450 Sport
4WD robotic pool cleaner with innovative features, including the Easy Lift System, 7-day programmable timer, and Vortex Vacuum technology.
Polaris 9350 Sport
The Polaris 9350 Sport robotic provides exceptional 2WD cleaning performance.
Polaris 9550 Sport Spare Parts & Accessories
R0785800 Polaris Robotic Cleaner Cover
Protect your investment with a cover that fits over most Polaris Robotic models.
