Polaris Vac-Sweep 380

Most Powerful, Durable Pressure Pool Cleaner

SKU #F3

Powered by triple jets and a separate booster pump, the Polaris 380 is one of our most powerful, durable cleaners and is suitable for all in-ground pools.

The Polaris Vac-Sweep 380 pressure cleaner works in all in-ground pools, and requires a booster pump. It features an all-wheel, belt drive mechanism that provides greater vacuum power and faster cleaning (3 hours or less). Powered by triple jets, the Polaris 380 sweeps, scrubs and vacuums the bottom, walls and steps of the pool and holds debris in its single chamber filter bag. Its unique filter bag removes debris before it reaches your pump basket or filter, prolonging the life of your filtration system.

Buy Now

View Specifications

Polaris 380 Pressure Automatic Pool Cleaner Cleaning Pool Wall

Powered by Triple Jets

Powered by triple jets providing greater vacuum power and faster cleaning
Works in all in-ground pools of any size and shape
Sweeps, scrubs, and vacuums the bottom and walls of your pool
Runs off separate booster pump
Equipped with single chamber filter bag and includes 31-feet of feed hose
Available in a Black Max^™ Model to complement dark bottom pools

Polaris Vac-Sweep 380 Specifications

Polaris Vac-Sweep 380 User Guides

Document ID H0498400

Description Polaris 380/P38 Owner's Manual

File Size 1.39 MB

File Type PDF

Document ID SL825

Description Polaris Inground Cleaner Family Brochure

File Size 1.42 MB

File Type PDF

Document ID TL-1013

Description Polaris Hose Connector Replacement Instructions

File Size 478.49 KB

File Type PDF

Document ID TL-864

Description Polaris 380 Factory Rebuild Kit

File Size 697.75 KB

File Type PDF

Document ID TL862

Description Polaris 380 In-line Back-up Valve Conversion Kit Installation Instructions

File Size 294.86 KB

File Type PDF

Polaris Vac-Sweep 380 Frequently asked questions

Cleaner does not move but there is pressure going to the unit.

Verify the wheel RPM's are in range. If they are low or the wheels are not spinning then check the in-line filter for debris. If clear and the wheels still aren't spinning then check the water management system for clogs. If the RPM's are slightly below the prescribed range then remove the restrictor disc from the wall connector. If the wheels are moving too quickly then install the red restrictor disc.

Cleaner does not climb/goes in circles.

Verify that the wheel RPM's are in the correct range and adjust the thrust jet. If the cleaner isn't climbing well then ensure the thrust jet is in the 11 o'clock position. If it is going in circles then angle the thrust jet so it is pointing opposite of the way the cleaner is turning. For example, if the cleaner is turning right then point the thrust jet to the left.

Hose(s) becomes tangled or coiled.

Check swivels and make sure they are spinning freely. Lay the hose out in the sun for 24 hours to eliminate any potential hose memory.

Polaris doesn't back up.

Hold the back up valve out of the water and verify that it cycles on and off. A complete cycle takes about three minutes. If it stays on all the time or doesn't come on at all then replace the back up valve.

The cleaner is tipping over/floating.

Verify the wheel RPM's are in range. Ensure that the head float is not filled with water. Try running the cleaner without the bag and if it fixes the issue then clean the bag with soap and warm water. This will remove any biofilm/oils that may have accumulated in the bag.

The cleaner is running in circles on its side.