Polaris Home
Polaris Home
Find a Retailer
SKU #F4TR

Polaris Quattro® Sport

Polaris Quattro Sport Pressure Pool Cleaner

Polaris Quattro® Sport Spare Parts & Accessories

R0995100
R0995100

R0995100 Polaris Quattro™ Factory Tune-Up Kit

This tune-up kit is a convenient repair kit equipped with key parts to rejuvenate and extend the life of any QUATTRO cleaner.

Polaris Quattro® Sport User Guides

Document ID H0609300
Description Polaris Quattro Quick Start Guide
File Size 4.46 MB
|
File Type PDF
Document ID H0645700
Description Polaris Quattro Owners Manual
File Size 17.51 MB
|
File Type PDF
Document ID SL3744
Description Polaris Quattro Brochure
File Size 2.71 MB
|
File Type PDF

Polaris Quattro® Sport Frequently asked questions

  1. Remeasure the hose to verify that it is adjusted to the proper length for the pool shape.
  2. With the cleaner operating, check that the hose swivels and the hose connections turn freely.
  3. Ensure the hose is floating and the hose floats are positioned properly. Position the first float (k) up against the feed hose connector (j) and then space hose floats 1-3 ft (30-90 cm) apart.
  4. Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed in the manual.
  5. Straighten the hose assembly by laying it out flat in the sun.
  1. Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed.
  2. Check for debris in the filter canister and clean, if necessary.
  3. Ensure the hose is floating and the hose floats are positioned properly. Position the first float (k) up against the feed hose connector (j) and then space hose floats 1-3 ft (30-90 cm) apart.
  4. Adjust the thrust jet. Refer to Section 8 Fine Tuning in the manual.
  5. Remove unnecessary pool hardware or install a Ladder Guard Kit (part # G21) from a Polaris® dealer.
  6. Install a Back-Up Valve accessory (part # G62, black or part # G52, white) from a Polaris dealer. Additional hose nuts and swivel may be required. Position the back-up valve and its adjacent hose float 6-8 ft (1.8 - 2.4m) away from the cleaner.
Check the thrust jet position and adjust thrust jet flow, if necessary. Refer to Section 8 Fine Tuning in the manual.
  1. Ensure the hose length is adjusted to the proper length for the pool shape. Refer to Section 3 Adjust Hose Length in the manual.
  2. Adjust the thrust jet to improve coverage. Refer to Section 8 Fine Tuning in the manual.
  1. Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed in the manual.
  2. Check for debris in the filter canister and clean, if necessary.
  3. Check the filter screen and the in-line filter and clean, if necessary.
  4. Clean the skimmer basket, pump basket, and pool filter.
  5. Check all of the hoses, connections, and swivels for leaks that could cause loss of water pressure.
  1. Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed.
  2. Ensure the hose is floating and the hose floats are positioned properly. Position the first float (k) up against the feed hose connector (j) and then space hose floats 1-3 ft (30-90 cm) apart.
  3. Check for debris in the filter canister and clean, if necessary.
  4. Adjust the thrust jet. Refer to Section 8 Fine Tuning in the manual.
  5. For smooth surface pools (tile, fiberglass, etc.), replace both rear tires with PosiTrax® tires for more traction (available from a Polaris® dealer).
Replace both rear tires with PosiTrax tires for more traction (available from a Polaris dealer).